|
|
ZIVE BP2A |
Hardware
Dual channel potentiostat/galvanostat/ZRA
Control voltage range : ±10V
Current range : 2nA to 2A (20pA with gain)
Galvanic corrosion test is available
|
|
|
|
|
|
|
|
|
응용 분야
Application
- Bio-electrochemistry
- Sensor
- Corrosion
- Material testing
- Battery / Super capacitor
- Fuel cell
- Solar cell
- Other Echem experiments
Features
- High quality dual channel potentiostat/galvanostat/impedance analyzer
- Voltage range : c10V
- Current range : ±2A, 11 ranges
- 2nA to 2A
- 20pA with gain
- 3 measurement voltage ranges
- 11 measurement/control current ranges
- lowest one range with gain
- frequency range : 10uHz ~ 2MHz
- 14 EIS techniques capability including multisine implementation
- High speed data sampling time
- 2usec or 3usec depending on data point number
- Fast sweep mode(5000V/sec with 10mV data sampling)
- iR compensation and measurement
- Voltage pulse or current pulse charge/discharge test (GSM,CDMA etc.)
- Sine wave function for ripple simulatin in energy software package &
pulse plating available
- Internal 542,000 data point storage and continuing experiment regardless of PC failure
- Plug & play channel module type
- calibration data & hardware maintenance per channel
- Simultaneous 3 auxiliary voltage measurement
- 3 digital outputs & 2 digital inputs
- One auxiliary analog output
- External booster is available. (ZIVE ZE series)
- Inclues basic software, Energy/Impedance/Battery/Echem analysis software packages
- Free software upgrade
Cell Configuration
Experimental Techniques
Basic techniques
- Potentiostatic
- Galvanostatic
- Double step potentiostatic
- Double step galvanostatic
- OCP measurement
- Potential sweep
- Current sweep
- Cyclic voltammetry
- Fast potential sweep
- Potentiostatic Ru measurement
- Galvanostatic Ru measurement
Advanced software techniques(Included)
- EIS software package(EIS)
- Potentiostat EIS - Galvanostatic EIS - Pseudo galvanostatic EIS - OCP* EIS - Potentiodynamic PEIS - Galvanodynamic GEIS - Poteniodynamic HFR - Galvanodynamic HFR - Galvanostatic HFR monitor - Potentiostatic HFR monitor - Multisine potentiostatic EIS - Multisine galvanostatic EIS - Intermittent potentiostatic EIS - Intermittent galvanostatic EIS (*) The system measures open circuit potential before each frequency change
and applies AC sine wave on this potential.
- Corrosion software package(COR)
- Tafel(Tafel experiment) - Rp(Polarization resistance) - RpEc trend - PDYN(Potentiodynamic) - CYPOL(Cyclic polarization resistance) - GDYN(GalvanoDynamic) - Reactivation - Galvanic corrosion - Potentiostatic ECN - Galvanostatic ECN - ZRA mode ECN
- Energy software package(BAT)
a) Battery test technique - CC/CV test for cycle life test of lithium battery - CC/CC tet for cycle life test of NiCd or NiMH battery - Discharging test - EVS(electrochemical voltage spectroscopy) - Variable scan rate CV - Potentiostatic IV curve - Galvanostatic IV curve - Steady state CV - PITT(Potentiostatic intermittent titration technique) test - GITT(Galvanostatic intermittent titration technique) test - Pulse mode is available for GSM & CDMA profile. Pulse shape profile can be measured by user's demand. b) Control mode - Charge : CC, CC-CV, pulse, sine wave - Discharge : CC, CP, CR, pulse, sine wave c) Cut-off condition - Time, voltage, current, power, auxV etc. - Various battery charge/discharge test is available including pulse discharge for GSM, CDMA application
- Electrochemical analysis software package(EAS)
a) Step techniques - CA(Chronoamperometry) - CC(Chronocoulometry) - CP(Chronopotentiometry) b) Sweep techniques - LSV(Linear sweep voltammetry) - SDV(Sampled DC voltammetry) - Fast CV - Fast LSV c) Pulsed techniques - DPV(Differential pulse voltammetry) - SWV(Square wave voltammetry) - DPA(Diff.pulse amperometry) - NPV(Normal pulse voltammetry) - RNPV(Reverse normal pulse voltammetry) - DNPV(Differential normal pulse voltammetry)
Options
|
|
|
|
|
|
|
|
|
|
|
|