WonATech
   
 

 
Product | Impedance Analyzer
ZIVE MP10
Applicaton
  • High quality multichannel potentiostat/galvanostat/impedance analyzer
  • Control voltage range: ±5V, ±500mV, ±50mV
  • Control current range: 1nA ~ 10A (1nA with gain, 11 ranges)
  •  
       
      Hardware

    Power amplifier (CE)

    Power

    60Watt(6V@10A)

    Compliance voltage

    ±6V

    Max. current

    ±10A

    Control speed selection

    8 ea

    Bandwidth

    1MHz

    Slew rate

    10V/usec

    Potentiostat mode(voltage control)

    Voltage control

    - Control voltage range

    ±5v, ±500mV, ±50mV

    - Voltage resolution

    16 bit per each range

    - Voltage accuracy

    ±0.02% fs(gain x1)

    - Max. scan range

    ±5V vs. ref. E

    Current measurements

    - Current range

    11 ranges (auto/manual setting)
    10nA~10A (1nA with gain)

    - Current resolution

    16 bit
    300uA, 30uA, 3uA, 300nA, 30nA, 3nA
    300pA, 30pA, 3pA, 300fA, 30fA

    - Current accuracy

    ±0.03% f.s.(gain x1) >1uA

    Galvanostat mode(current control)

    Current control

    - Control current range

    max. ±10A
    ± full sacle depending on selected range

    - Current resolution

    16 bit
    300uA, 30uA, 3uA, 300nA, 30nA, 3nA
    300pA, 30pA, 3pA, 300fA, 30fA

    - Current accuracy

    ±0.03% f.s.(gain x1) >1uA

    Voltage measurements

    Voltage range

    ±5V, ±500mV, ±50mV

    Voltage resolution

    16 bit 150uV, 15uV, 1.5uV

    Voltage accuracy

    ±0.02% fs(gain x1)

    Electrometer

    Max. input voltage

    ±10V

    Input impedance

    >2x1013Ω||4.5pF

    Bandwidth

    >22MHz

    CMRR

    >114dB

    EIS Measurement for system

    Frequency range

    10uHz ~ 1MHz

    Frequency accuracy

    <0.01%>

    Frequency resolution

    5000/decade

    Amplitude

    0.1mV ~ 5Vrms(potentiostatic)
    0.1 ~ 70% f.s.(galvanostatic)

    Mode

    Static EIS:
    potentiostatic, galvanostatic,
    pseudo-galvanostatic, OCP
    Dynamic EIS:
    potentiodynamic, galvanodynamic
    Fixed frequency impedance:
    potentiostatic, galvanostatic,
    potentiodynamic, galvanodynamic
    Multisine EIS:
    potentiostatic, galvanostatic
    Intermittent PEIS/GEIS

    Main system

    PCcommunication

    USB2.0 high speed

    Line voltage

    100~240VAC, 50/60Hz

    Size/weight

    465x545x286mm(WxDxH)

    Max. channel number

    4 independent channels per unitMax

    Max. channel

    32 channels(8 units) expandable per PCMax

    Software

    Max. step per experiment

    1,000

    Shutdown safety limits

    voltage, current, temperature etc.

    Max. sampling rate

    2usec or 3usec depending on data point number

    Min. sampling time

    unlimited

    Sampling condition

    time, dv/dt, dI/dt, temp. etc.

    Interface for system

     Auxiliary port

      - Digital output

    3 (open collector)

      - Digital input

    2 (photo coupler)

      - Auxiliary voltage inputs

    3 analog input: ±10V
    for measurement of WE vs. CE
    CE vs. RE or other signal

      - Analog output

    1 analog output : ±10V
    for stirrer, MFC, RDE, etc.

     Misc.port

      - Sig generator output

    1 analog output for FRA output or
    waveform generation output

      - Peripheral communication

    I2C to control external devices

      - Temperature measurement

    1 K-type thermocouple input

      - Zero resistance ammeter

    10nA ~ 10A ranges

    System

    Cell cable

    1 meter shielded type (standard)
    Power terminal: working, counter
    Sense terminal: reference, working sense

    Control
    DAC

    DSP with FPGA
    2x16bit DAC(50MHz) for bias & scan
    1x16bit DAC(1MHz) for analog output

    Data acquisition
    ADC

    2x16bit ADCs(500kHz) for voltage & current
    1x16bit ADCs(250kHz) for auxiliary voltage and
    temperature reading

    Calibration

    Automatic

    Filter selection

    4 ea(5Hz, 1kHz, 500kHz, 5MHz)

    Scan rate

    0 ~ 200V/sec in common mode
    0 ~ 5000V/sec in fast mode

    LED indicator

    Busy, Run

    Max. output power

    60Watt per channel

    Internal data memory

    542,000 points

    PC requirement

    Operating system

    Windows 7/8/10(32bit/64bit OS)

    PC specification(minimum)

    Pentium4, RAM 1GB or higher

    Display

    1600x900 high color or higher

    USB

    high speed 2.0

    General

    Dummy cell

    One external dummy cell included

    Thermocouple

    1.5meter K-type (option)

    Auxiliary cable

    Option

    Misc. cable

    Option

    Impedance data analysis software ZMANTM software

    DC data analysis software

    IVMANTM software

    The specifications are subject to change without notice.

       
     
    WPG Series
    Mid power type WPG100S (Max 400watt)
     
    ZIVE SP & PP Series
    ZIVE SP10
     
    Power Booster
    Power Booster
     
    Accessories for Battery Test
    High current cylindrical battery jig