WonATech
   
 

 
Product | Impedance Analyzer
ZIVE MP2A
Hardware
  • High quality multichannel potentiostat/galvanostat/impedance analyzer
  • Control voltage range: ±10V, ±1V, ±100mV
  • Control current range: 20pA ~ 2A (200pA with gain, 11 ranges)
  • Channel expandable up to 32 channels
  •  
       
      Hardware

    Power amplifier (CE)

    Power

    24Watt(12V@2A)

    Compliance voltage

    ±12V

    Max. current

    ±2A

    Control speed selection

    8ea

    Bandwidth

    4MHz

    Slew rate

    15V/usec

    Potentiostat mode(voltage control)

    Voltage control

       - Control voltage range

    ±10, ±1V, ±100mV

    - Voltage resolution

    16 bit per each range

       - Voltage accuracy

    ±1mV ±0.05% of setting(gain x1)

       - Max. scan range

    ±10V vs. ref. E

    Current measurements

       - Current range

    11 ranges (auto/manual setting)
    2nA to 2A (200pA with gain)

       - Current resolution

    16 bit;
    60uA, 6uA, 600nA, 60nA, 6nA, 600pA
    60pA, 6pA, 600fA, 60fA, 6fA

       - Current accuracy

    ±10pA ±0.1%f.s.(gainx1)>200nA

    Galvanostat mode(current control)

    Current control

       - Control current range

    max. ±2A
    ± full sacle depending on selected range

       - Current resolution

    16 bit;
    60uA, 6uA, 600nA, 60nA, 6nA, 600pA
    60pA, 6pA, 600fA, 60fA, 6fA

       - Current accuracy

    ±10pA ±0.1% f.s.(gain x1) >200nA f.s.

    Voltage measurements

       - Voltage range

    10V, 1V, 100mV

       - Voltage resolution

    16 bit; 0.3mV, 30uV, 3uV

       - Voltage accuracy

    ±1mV, ±0.05% of reading(gain x1)

    Electrometer

    Max. input voltage

    ±10V

    Input impedance

    2x1013Ω||4.5pF

    Bandwidth

    >22MHz

    CMRR

    >114dB

    EIS(Internal FRA) for system

    Frequency range

    10uHz ~ 2MHz

    Frequency accuracy

    <0.01%

    Frequency resolution

    5000/decade

    Amplitude

    0.1mV ~ 5V rms (potentiostatic)
    0.1 ~ 70% f.s. (galvanostatic)

    Mode

    Static EIS:
    potentiostatic, galvanostatic,
    pseudo-galvanostatic, OCP
    Dynamic EIS:
    potentiodynamic, galvanodynamic
    Fixed frequency impedance:
    potentiostatic, galvanostatic,
    potentiodynamic, galvanodynamic
    Multisine EIS:
    potentiostatic, galvanostatic

    Main system

    PCcommunication

    USB2.0 high speed

    Line voltage

    100~240VAC, 50/60Hz, 1Amp

    Max. channel number per unit

    8 independent channel per unit

    Max. channel

    32 channels(4 units) expandable per PC

    Size/Weight

    448.7x188.4x535.4mm(WxHxD) / 23.3kg(8ch)

    Software

    Max. steps per experiments

    1000

    Shutdown safety limits

    voltage, current, temperatrue etc.

    Max. sampling rate

    2usec or 3usec depending on data point numbers

    Min. sampling time

    unlimited

    Sampling condition

    time, dv/dt, dI/dt, temperature etc.

    Interface for system

     Auxiliary port

      - Digital output

    3 (open collector)

      - Digital input

    2 (photo coupler)

      - Auxiliary voltage inputs

    3 analog input: ±10V
    for measurement of WE vs. CE
    CE vs. RE or other signal

      - Analog output

    1 analog output : ±10V
    for stirrer, MFC, RDE etc.

     Misc.port

      -Signal generator output

    1 analog output for FRA output or
    waveform generation output

      - Peripheral communication

    12C to control external devices

      - Temperature measurement

    1 K-type thermocouple input

      - Zero resistance ammeter

    2nA ~ 2A ranges

    Channel System

    Cell cable

    1 meter shielded type (standard)
    working, reference, counter, working sense

    Control

    DSP with FPGA

    DAC

    2x16bit DAC(50MHz) for bias & scan
    1x16bit DAC(1MHz) for analog output

    Dataacquisition
    ADC

    2x16bit ADCs(500kHz) for voltage & current
    1x16bit ADCs(250kHz) for auxiliary voltage &
    temperature reading

    Calibration

    Automatic

    Filter selection

    4ea(5Hz, 1kHz, 500kHz, 5MHz)

    Scan rate

    0 ~ 200V/sec in common mode
    0 ~ 5000V/sec in fast mode

    LED indicator

    busy, run

    Internal data memory

    542,000 points

    Max. output power

    30Wattper channel

    PC requirement

    Operating system

    WindowsXP SP3/7/8/10(32bit/64bit OS)

    PC specification(minimum)

    Pentium4, RAM 1GB or higher

    Display

    1600x900 high color or higher

    USB

    high speed 2.0

    General

    Dummy cell

    One external dummy cell included

    Thermocouple

    1.5meter K-type (option)

    Auxiliary cable

    Option

    Misc. cable

    Option

    Impedance analysis software

    ZmanTM

    DC data analysis software

    IVmanTM

    The specifications are subject to change without notice.

       
     
    WPG Series
    WPG100e
     
    ZIVE SP & PP Series
    ZIVE SP2
     
    ZIVE BP/MP Series
    ZIVE BP2A