WonATech
   
 

 
Product | Impedance Analyzer
ZIVE MP5H
Hardware
  • High voltage multichannel potentiostat/galvanostat/impedance analyzer
  • Control voltage range: ±40V, ±4V, ±400mV
  • Control current range: 100pA ~ 1A (100pA with gain, 11 ranges)
  • Channel expandable up to 32 channels
  •  
       
      Hardware

    Power amplifier (CE)

    Power

    40Watt (40V@1A)

    Compliance voltage

    ±40V

    Max. current

    ±1A

    Control speed selection

    8 ea

    Bandwidth

    700kHz

    Slew rate

    7V/usec

    Potentiostat mode(voltage control)

    Voltage control

    Control voltage range

    ±40V, ±4V, ±400mV

    Voltage resolution

    16 bit per each range

    Voltage accuracy

    ±4mV ±0.1% of setting

    Max. scan range

    ±40V vs. ref. E

    Current measurements

    Current range

    11 ranges (auto/manual setting)
    1nA~1A (100pA with gain)

    Current resolution

    16 bit;
    30uA, 3uA, 300nA, 30nA, 3nA, 300pA,
    30pA, 3pA, 300fA, 30fA, 3fA

    Current accuracy

    ±0.1% f.s.(gain x1) >100nA

    Galvanostat mode(current control)

    Current control

    Control current range

    max. ±1A
    ± full sacle depending on selected range

    Current resolution

    16 bit;
    30uA, 3uA, 300nA, 30nA, 3nA, 300pA,
    30pA, 3pA, 300fA, 30fA, 3fA

    Current accuracy

    ±0.1% f.s.(gain x1)>100nA

    Voltage measurements

    Voltage range

    ±40V, ±4V, ±400mV

    Voltage resolution

    16 bit; 1.2mV, 120uV, 12uV

    Voltage accuracy

    ±4mV ±0.1% of reading 12uV

    Electrometer

    Max. input voltage

    ±40V

    Input impedance

    2x1013Ω||1pF

    Bandwidth

    >2MHz

    CMRR

    >95dB

    EIS(Internal FRA) for system

    Frequency range

    10uHz~600kHz

    Frequency accuracy

    <0.01%>

    Frequency resolution

    5000/decade

    Amplitude

    1mV~20Vrms(Potentiostatic)
    0.1~70% f.s.(Galvanostatic)

    Mode

    Static EIS:
    potentiostatic, galvanostatic,
    pseudo-galvanostatic, OCP
    Dynamic EIS:
    potentiodynamic, galvanodynamic
    Fixed frequency impedance:
    potentiostatic, galvanostatic,
    potentiodynamic, galvanodynamic
    Multisine EIS:
    potentiostatic, galvanostatic
    Intermittent PEIS/GEIS

    Main system

    PCcommunication

    USB2.0 high speed

    Line voltage

    100~240VAC, 50/60Hz, 1Amp

    Max. channel number per unit

    8 independent channel per unit

    Max. channel

    32 channels(4 units) expandable per PC

    Size

    448.7x277.3x535.4mm (WxHxD) / 29kg(8ch)

    Software

    Max. steps per experiments

    1000

    Shutdown safety limits

    voltage, current, temperatrue etc.

    Max. sampling rate

    20kHz(50usec) inburst mode
    500kHz(2usec) in fast sweep mode

    Min. sampling time

    unlimited

    Sampling condition

    time, dv/dt, dI/dt, temperature etc.

    Interface for system

    Auxiliary port

    - Digital output

    3 (open collector)

    - Digital input

    2 (photo coupler)

    - Auxiliary voltage inputs

    3 analog input: ±10V
    for measurement of WE vs. CE
    CE vs. RE or other signal

    - Analog output

    1 analog output : ±10V
    for stirrer, MFC, RDE etc.

    Misc.port

    - Signal generator output

    1 analog output for FRA output or
    waveform generation output

    - Peripheral communication

    12C to control external devices

    - Temperature measurement

    1 K-type thermocouple input

    - Zero resistance ammeter

    1nA ~ 1A ranges

    Channel System

    Cell cable

    1 meter shielded type (standard)
    working, reference, counter, working sense

    Control
    DAC

    DSP with FPGA
    2x16bit DAC(50MHz) for bias & scan
    1x16bit DAC(1MHz) for analog output

    Dataacquisition
    ADC

    2x16bit ADCs(500kHz) for voltage & current
    4x16bit ADCs(250kHz) for auxiliary voltage &
    temperature reading

    Calibration

    Automatic

    Filter selection

    4ea(5Hz, 1kHz, 500kHz, 5MHz)

    Scan rate

    0 ~ 200V/sec in common mode
    0 ~ 5000V/sec in fast mode

    LED indicator

    busy, run

    Internal data memory

    542,000 points

    Max. output power

    48Watt per channel

    PC requirement

    Operating system

    WindowsXP SP3/7/8/10(32bit/64bit OS)

    PC specification(minimum)

    Pentium4, RAM 1GB or higher

    Display

    1600x900 high color or higher

    USB

    high speed 2.0

    General

    Dummy cell

    One external dummy cell included

    Thermocouple

    1.5meter K-type (option)

    Auxiliary cable

    Option

    Misc. cable

    Option

    Impedance analysis software

    ZmanTM

    DC data analysis software

    IVmanTM

    The specifications are subject to change without notice.

       
     
    WPG Series
    Mid power type WPG100S (Max 400watt)
     
    ZIVE SP & PP Series
    ZIVE SP5HC
     
    ZIVE BP/MP Series
    ZIVE MP5
     
    ZIVE BP/MP Series
    ZIVE MP5H