WBCS mid power type
Mid power model
8 channel battery cycler (expandable up to 128 channels)
max. power per channel : 100Watt
voltage range : ±5V (standard)
max. current per channel : ±10A@5V
Customized specification is available
- Super capacitor
- Fuel cell
- Electroplating / Electrosynthesis / Electrolysis
- Other Echem experiments
- Mid power type
- Max. power per channel : 100Watt(power = (max. voltage-Min voltage) x max. current)
- Voltage range : ±5V (standard)
- Current range : max. ±10A@5V, 4 ranges (depending on system specification)
- Voltage accuracy : ±0.02% f.s.
- Current accuracy : ±0.05% f.s.
- Sampling time
- 8~16 channel system : 20msec
- 17~32 channel system : 25msec
- 33~128 channel system : 50msec
- Max. 290,000 data point memory on control board
- Potentiostat/galvanostat circuit
- no switching time (charging to discharging, discharging to
- analog feedback control to keep constant voltage &
- capability of electrochemical experiments by controlling voltage
reference electrode for positive voltage polarity only.
- High precision
- 16bit(0.0015% full scale) ADC, DAC
- MOSFET type linear power supply circuit.
- shield cell cable to prevent EMI noise
- unique “fail check” function: to protect the system and cell, the system
will automatically stop when measured value is different
value by battery failure or wrong cell connection etc.
- system safety parameter: if the
measured value is over system specification,
the running channelwill stop automatically.
- user defined safety condition
setting: user can input safety level following
- automatic cell connection check:
before experiment, if the cell voltage value
is near 0Volt, program gives the
warning message for the operator to check
- if the operator did press stop function
button by mistake, confirmation message
- to prevent over current, poly-switch
is located in each channel.
- watchdog function: stop “running
channel(s)” on communication failure.
- while any channel is running,
operator could not close the server program.
- if main program was down by unstable
operating system, independent server
program keeps the experiment (control &
data acquisition) without dead time.
- Maintenance & system
- plug-in type
- power supply per
- easy expansion up to 128 channels by adding plug in
channel or by adding 8ch substation
- each channel has Poly switch instead
- User friendly software
- Compatible with IVMANTM DC data analysis software without purchasing license code
- Customized specification available
- CC/CV (Lithium battery) test menu
- CC/CC (NiCd(NiMH) battery) test menu
- Steady state CV
- Pstat IV curve
- Gstat IV curve
- EVS (Electrochemical voltage spectroscopy) test
- GITT (Galvanostatic intemittent titration technique) test
- PITT (Potentiostatic intermittent titration technique) test
- Ecorr vs.
- Auxiliary voltage monitoring
- Temperature monitoring
- Battery jig