ZIVE SP & PP Series |
|
ZIVE SP5H |
High voltage & high compliance voltage potentiostat
/galvanostat/impedance analyzer
Voltage range : ±40V
Current range : 1nA~1A (100pA with gain)
Compliance voltage : ±40V
|
|
|
|
|
|
|
|
|
응용 분야
Application
- Battery / Super capacitor
- Fuel cell
- Electrosynthesis/Electrolysis
- Solar cell
- Other Echem experiments
Features
- high voltage, high compliance potentiostat/galvanostat/impedance analyzer
- voltage range : ±40V, ±4V, ±400mV
- current range : 11 ranges
- 1nA to 1A
- 100pA with gain
- compliance voltage : ±40V
- frequency range : 10uHz ~ 600kHz
- built-in FRA : enables EIS tests
- 14 EIS techniques capability(option) including multisine
- capable of multitude of applications
- corrosion, general electrochemistry, sensor, battery, fuel cell, supercapacitor, solar cell, etc.
- bipolar pulse capability
- voltage pulse or current pulse charge/discharge test(GSM,CDMA etc.),
sine wave function for ripple simulation in battery test package & pulse plating available
- high speed data sampling time
- 2usec or 3usec depending on data point number
- fast sweep mode(5000V/sec with 10mV data sampling)
- iR compensation & measurement
- 3 measurement/control voltage ranges &
11 measurement/control current ranges
- internal 452,000 data point storage & continuing experiment regardless
of PC failure.
- LCD diaplay
- multichannel configuration available by connecting multiple SP5H or other ZIVE products
- power booster(ZIVE ZB series) available
- inclues basic software, Energy/Impedance/Battery/Echem analysis software packages
- free software upgrade
Experimental Techniques
Basic techniques
- Potentiostatic
- Galvanostatic
- Double step potentiostatic
- Double step galvanostatic
- OCP measurement
- Potential sweep
- Current sweep
- Cyclic voltammetry
- Fast potential sweep
- Potentiostatic Ru measurement
- Galvanostatic Ru measurement
Advanced software techniques(included)
- EIS software package(EIS)
- Potentiostat EIS - Galvanostatic EIS - Pseudo galvanostatic EIS - OCP* EIS - Potentiodynamic PEIS - Galvanodynamic GEIS - Poteniodynamic HFR - Galvanodynamic HFR - Galvanostatic HFR monitor - Potentiostatic HFR monitor - Multisine potentiostatic EIS - Multisine galvanostatic EIS - Intermittent potentiostatic EIS - Intermittent galvanostatic EIS (*) The system measures open circuit potential before each frequency change
and applies AC sine wave on this potential.
- Corrosion software package(COR)
- Tafel(Tafel experiment) - Rp(Polarization resistance) - RpEc trend - PDYN(Potentiodynamic) - CYPOL(Cyclic polarization resistance) - GDYN(GalvanoDynamic) - Reactivation - Galvanic corrosion - Potentiostatic ECN - Galvanostatic ECN - ZRA mode ECN
- Energy software package(BAT)
a) Battery test technique - CC/CV test for cycle life test of lithium battery - CC/CC tet for cycle life test of NiCd or NiMH battery - Discharging test - EVS(electrochemical voltage spectroscopy) - Variable scan rate CV - Potentiostatic IV curve - Galvanostatic IV curve - Steady state CV - PITT(Potentiostatic intermittent titration technique) test - GITT(Galvanostatic intermittent titration technique) test - Pulse mode is available for GSM & CDMA profile. Pulse shape profile can be measured by user's demand. b) Control mode - Charge : CC, CC-CV, pulse, sine wave - Discharge : CC, CP, CR, pulse, sine wave c) Cut-off condition - Time, voltage, current, power, auxV etc. - Various battery charge/discharge test is available including pulse discharge for GSM, CDMA application
- Electrochemical analysis software package(EAS)
a) Step techniques - CA(Chronoamperometry) - CC(Chronocoulometry) - CP(Chronopotentiometry) b) Sweep techniques - LSV(Linear sweep voltammetry) - SDV(Sampled DC voltammetry) - Fast CV - Fast LSV c) Pulsed techniques - DPV(Differential pulse voltammetry) - SWV(Square wave voltammetry) - DPA(Diff.pulse amperometry) - NPV(Normal pulse voltammetry) - RNPV(Reverse normal pulse voltammetry) - DNPV(Differential normal pulse voltammetry)
Options
Product Images
|
|
|
|
|
|
|
|
|
|
|
|