WonATech
   
 

 
Product | Impedance Analyzer
ZIVE BP/MP Series
ZIVE BP2A
Hardware
  • Dual channel potentiostat/galvanostat/ZRA
  • Control voltage range : ±10V
  • Current range : 2nA to 2A (20pA with gain)
  • Galvanic corrosion test is available
  •  
       
      응용 분야

    Application

    • Bio-electrochemistry
    • Sensor
    • Corrosion
    • Material testing
    • Battery / Super capacitor
    • Fuel cell
    • Solar cell
    • Other Echem experiments

     

    Features

    • High quality dual channel potentiostat/galvanostat/impedance analyzer
    • Voltage range : c10V
    • Current range : ±2A, 11 ranges
      - 2nA to 2A
      - 20pA with gain
    • 3 measurement voltage ranges
    • 11 measurement/control current ranges 
      - lowest one range with gain
    • frequency range : 10uHz ~ 2MHz
    • 14 EIS techniques capability including multisine implementation
    • High speed data sampling time
      2usec or 3usec depending on data point number
    • Fast sweep mode(5000V/sec with 10mV data sampling)
    • iR compensation and measurement
    • Voltage pulse or current pulse charge/discharge test (GSM,CDMA etc.)
    • Sine wave function for ripple simulatin in energy software package &
      pulse plating available
    • Internal 542,000 data point storage and continuing experiment regardless of PC failure
    • Plug & play channel module type
      - calibration data & hardware maintenance per channel
    • Simultaneous 3 auxiliary voltage measurement
    • 3 digital outputs & 2 digital inputs
    • One auxiliary analog output
    • External booster is available. (ZIVE ZE series)
    • Inclues basic software, Energy/Impedance/Battery/Echem analysis software packages
    • Free software upgrade

     

    Cell Configuration

     

    Experimental Techniques

    Basic techniques

    • Potentiostatic
    • Galvanostatic
    • Double step potentiostatic
    • Double step galvanostatic
    • OCP measurement
    • Potential sweep
    • Current sweep
    • Cyclic voltammetry
    • Fast potential sweep
    • Potentiostatic Ru measurement
    • Galvanostatic Ru measurement

     

    Advanced software techniques(Included)

    • EIS software package(EIS)
      - Potentiostat EIS
      - Galvanostatic EIS
      - Pseudo galvanostatic EIS
      - OCP* EIS
      - Potentiodynamic PEIS
      - Galvanodynamic GEIS
      - Poteniodynamic HFR
      - Galvanodynamic HFR
      - Galvanostatic HFR monitor
      - Potentiostatic HFR monitor
      - Multisine potentiostatic EIS
      - Multisine galvanostatic EIS
      - Intermittent potentiostatic EIS
      - Intermittent galvanostatic EIS
      (*) The system measures open circuit potential before each frequency
          change and applies AC sine wave on this potential.


       
    • Corrosion software package(COR)
      - Tafel(Tafel experiment)
      - Rp(Polarization resistance)
      - RpEc trend
      - PDYN(Potentiodynamic)
      - CYPOL(Cyclic polarization resistance)
      - GDYN(GalvanoDynamic)
      - Reactivation
      - Galvanic corrosion
      - Potentiostatic ECN
      - Galvanostatic ECN
      - ZRA mode ECN
       
    • Energy software package(BAT)
      a) Battery test technique
         - CC/CV test for cycle life test of lithium battery  
         - CC/CC tet for cycle life test of NiCd or NiMH battery
         - Discharging test
         - EVS(electrochemical voltage spectroscopy)
         - Variable scan rate CV
         - Potentiostatic IV curve
         - Galvanostatic IV curve
         - Steady state CV
         - PITT(Potentiostatic intermittent titration technique) test
         - GITT(Galvanostatic intermittent titration technique) test
         - Pulse mode is available for GSM & CDMA profile.
           Pulse shape profile can be measured by user's demand.
      b) Control mode
         - Charge : CC, CC-CV, pulse, sine wave
         - Discharge : CC, CP, CR, pulse, sine wave
      c) Cut-off condition
         - Time, voltage, current, power, auxV etc.
         - Various battery charge/discharge test is available including
           pulse discharge for GSM, CDMA application
       
    • Electrochemical analysis software package(EAS)
      a) Step techniques
         - CA(Chronoamperometry)
         - CC(Chronocoulometry)
         - CP(Chronopotentiometry)
      b) Sweep techniques
         - LSV(Linear sweep voltammetry)
         - SDV(Sampled DC voltammetry)
         - Fast CV
         - Fast LSV
      c) Pulsed techniques
         - DPV(Differential pulse voltammetry)
         - SWV(Square wave voltammetry)
         - DPA(Diff.pulse amperometry)
         - NPV(Normal pulse voltammetry)
         - RNPV(Reverse normal pulse voltammetry)
         - DNPV(Differential normal pulse voltammetry)
         

     

    Options

    • Power booster        

     

       
     
    WPG Series
    WPG100e
     
    ZIVE SP & PP Series
    ZIVE SP2
     
    ZIVE BP/MP Series
    ZIVE MP2A