WonATech
   
 

 
Product | Battery Test System
WBCS low power type
WBCS3000Ls / WBCS3000Le
Hardware
  • Low current model
  • 8 channel battery cycler (expandable up to 128 channels)
  • max. voltage range : ±5V
  • max. current range :
        - Model WBCS3000Ls : ±10mA
        - Model WBCS3000Le : ±100mA
  • Customized specification is available.
  •  
       
      응용 분야

    Application

    • For low current application
    • Micro battery application
    • Sensor application
    • Electroanalytical application

    Features

    • low current type
    • voltage range : ±5V
    • current range : 4 ranges
      - Model WBCS3000Ls : max. 10mA
      - Model WBCS3000Le : max. 100mA
    • voltage/current accuracy : ±0.02% f.s.
    • sampling time
      * Without option
        - 8~40 channels system: 10msec
        - 41~80 channels system: 20msec
        - 81~128 channels system: 50msec
      * With option
        - 8~16 channels system: 10msec
        - 17~40 channels system: 20msec
        - 41~80 channels system: 50msec
        - 81~128 channels system: 50msec (2 SIF Boards)
      option)
    • max. 300,000 data point memory on control board
    • potentiostat/galvanostat circuit
      -
      no switching time (charging to discharging, discharging to charging)
      -
      analog feedback control to keep constant voltage & current
      -
      capability of electrochemical experiments by controlling voltage versus
        reference electrode for positive voltage polarity only.
    • high precision
      -
      16bit(0.0015% full scale) ADC, DAC
      - MOSFET type linear power supply circuit.
      -
      shield cell cable to prevent EMI noise
    • safety
      -
      unique “fail check” function: to protect the system and cell, the system
        will automatically stop when measured value is different from control
        value by battery failure or wrong cell connection etc.
      - system safety parameter: if the measured value is over system specification,
        the running channel will stop automatically.
      - user defined safety condition setting: user can input safety level following
        test cell’s chemistry.
      - automatic cell connection check: before experiment, if the cell voltage value
        is near 0Volt, program gives the warning message for the operator to check
        the cell connection.
      - if the operator did press stop function button by mistake, confirmation message
        box appears.
      - to prevent over current, poly-switch is located in each channel.
      - watchdog function: stop “running channel(s)” on communication failure.
      - while any channel is running, operator could not close the server program.
      - if main program was down by unstable operating system, independent server
        program keeps the experiment (control & data acquisition) without dead time.
    • maintenance & system expansion
      - plug-in type channels
      - power supply per 8 channel
      - easy expansion up to 128 channels by adding plug in channel or by adding 8ch
        substation
      - each channel has Poly switch instead of fuse.
    • LAN communication
    • User friendly software
    • Compatible with IVMANTM DC data analysis software without purchasing license code
    • Customized specification available

    Experimental Techniques

    Energy Test

    • CC/CV (lithium battery) test menu
    • CC/CC (NiCd(NiMH) battery) test menu
    • Steady state CV
    • Pstat IV curve
    • Gstat IV curve
    • EVS (Electrochemical voltage spectroscopy) test
    • GITT (Galvanostatic intemittent titration technique) test
    • PITT (Potentiostatic intermittent titration technique) test

    Electroanalytical techniques

    • Cyclic voltammetry
    • linear sweep voltammetry
    • Chrono-amperometry
    • Chrono-coulometry
    • Chrono-potentiometry


    Corrosion measurement

    • Tafel plot
    • Potentiodynamic
    • Potentiostatic
    • Galvanostatic
    • Cyclic polarization
    • Ecorr vs. time
    • linear polarization resistance

    Options

    • Auxiliary voltage & temperature measurement
    • Rack mount system available
    • Multiple control board configuration available
    • Battery jig


    Product Images

       
    WBCS low power type
    WBCS3000Ls32
     
    ZIVE SP & PP Series
    ZIVE SP1
     
    ZIVE BP/MP Series
    ZIVE MP1-4CH housing