WonATech
   
 

 
Product | Potentiostat/Galvanostat

WPG100 Introduction
   
  WPG Potentiostat/Galvanostat is for univeral electrochemical test. System hardware was designed for stable and accurate instrument using 16bit dual ADC and control 16bit DAC. Real time data storage makes the long-term experiment available.
SI Software for WPG
   
 
  • SI Software for WPG series
  • Provides pre-defined techniques menu and universal test procedure menu for user to make their own experiment procedure with cycle, loop and "and/or" logic. To use this software, SIF board is required.
  • WPG100e
       
     
  • Standard model
  • Voltage range : ±>10V (standard)
  • Current range : ±1A (8 ranges, standard)
  • Customer's specified range is available
  • Mid power type WPG100S (Max 400watt)
       
      제목 없음 If you need higher power potentiostat/galvanostat than standard type WPG100e, You can consider WPG100S model. This can support battery, fuel cell, corrosion, photoelectrochemistry etc.
    • 10V 20A (WPG100S1020)
    • 20V 10A (WPG100S2010)

    The above two model is for WPG100S typically but you can order with customized specification for your own purpose.

    Mid power type WPG100H8(Max 800watt)
       
      제목 없음

    For appication of 400 to 800watt, WPG100H8 model can support your application.
    Major applcation of this model are battery, fuel cell etc.

    • 10V 30A (WPG100H8_1030)
    • 20V 15A (WPG100H8_2020)
    • 40V 8A (WPG100H8_4008)

    The above 3 model is standard specification but you can order with customized specification.

    Mid power type WPG100H12 (Max 1200watt)
       
      제목 없음 This model can be used at max 1200Watt application in battery research, fuel cell etc..
    • 5V 100A (WPG100H12_5100)
    • 10V 50A (WPG100H12_1050)
    • 20V 25A (WPG100H12_2025)

    Above 3 model is typical specification but you can order with customized specification.
    Please contact with our sales representatives.

    WPG100HP
       
     
  • High power type
  • 3 or 1 current ranges
  • Customized specification is available within 4kWatt.

  • WMPG1000 Introduction
       
      System hardware was designed for stable and accurate instrument furthermore for easy expansion and maintenence WMPG series choose channel module with independent power suppliers per 8chsubstation(WMPG1000L(LE),S,M1,M2) and single or dual channel module having each power supply(WMPG1000D,H8,H12,HP
    SI Software for WMPG
       
      Hardware
  • Software for WMPG1000 series
  • 32bit multi-tasking
  • Virtual control panel
  • Tool bar: quick access for easy operation
  • User friendly software
  • To use this software, SIF board is required.
    WMPG1000L / WMPG1000Le
       
      Hardware
  • 8 channel potentiostat/galvanostat
  • Control voltage range : ±10V
  • Control current range :
        - Model WMPG1000L8 : ±10mA
        - Model WMPG1000Le8 : ±100m
  • Customized specification available
  • WMPG1000LK8 / WMPG1000LeK8
       
      Applicaton
  • 8 channel potentiostat/galvanostat
  • The specification is fixed.
  • Channel expansion is not available.
  • Control voltage range : ±10V
  • Control current range :
        - Model WMPG1000LK8 : ±10mA
        - Model WMPG1000LeK8 : ±100m
  • WMPG1000S
       
      Hardware
  • Standard model
  • 8 channel potentiostat/galvanostat
  • Channel expandable up to 128 channel per system
  • Control voltage range : ±10V
  • Control current range : Max. 5A (depending on system specification)
  • WMPG1000K8
       
      Hardware
  • 8 channel potentiostat/galvanostat
  • The specification is fixed.
  • Channel cannot be expandable.
  • Control voltage range : ±10V
  • Control current range : 5 ranges
        ±1A, ±100mA, ±10mA, ±1mA, ±100uA
  • WMPG1000M1
       
      Applicaton
  • Mid power model
  • 8 channel potentiostat/galvanostat
  • Channel expandable up to 128 channel per system
  • Voltage range : ±10V
  • Current range : Max. ±5A (depending on system specification)
  • Max. power per channel : 100Watt
  • WMPG1000M2
       
      Hardware
  • Mid power model
  • 8 channel potentiostat/galvanostat
  • Control voltage range : ±10V
  • Control current range : Max. ±20A (depending on system specification)
  • WMPG1000D: 2channel type(Max 400Watt/CH)
       
      제목 없음

    If you want to test under 400Watt cell, This model can be the best choice. Channel housing consists of 2 channels to minimize the cost and size.

    • +/-10V 20A (WMPG1000D1020)
    • +/-20V 10A (WMPG1000D2010H)

    The above two model is for WMPG1000D typically but you can order with customized specification for your own purpose.

    WMPG1000H8 (Max 800Watt/CH)
       
      제목 없음

    For appication of 400 to 800watt, WBCS3000H8 model can support your application,
    Major applcation of this model are battery, supercapacitor, etc.

    • 10V 30A (WBCS3000H8_1030)
    • 20V 15A (WBCS3000H8_2015)
    • 40V 8A (WBCS3000H8_4008)

    The above 3 model is standard specification but you can order with customized specification.

    WMPG1000H12(Max 1200Watt / CH)
       
      제목 없음
    This high power multichannel potentiostat/galvanostat can be used at max 1200Watt application in battery research, fuel cell, electrosynthesis, electrolysis,electroplating etc..
    • 5V 100A (WMPG1000H12_5100)
    • 10V 50A (WMPG1000H12_1050)
    • 20V 25A (WMPG1000H12_2025)

    Above 3 model is typical specification but you can order with customized specification.
    Please contact with our sales representatives.

    WMPG1000HP
       
      Hardware
  • High power model
  • 8 channel potentiostat/galvanostat
  • Channel expandable up to 128 channel per system
  • Max. power : 4kWatt per channel
  • Customized specification available
  •