ZIVE SP & PP Series |
|
ZIVE PP1e |
Applicaton
Portable potentiostat/galvanostat/ZRA system
Control voltage range: 10V, 1V, 100mV
Control current range: ±1A
|
|
|
|
|
|
|
|
|
Hardware
Application
- Battery / Super capacitor
- Fuel cell
- Corrosion
- Sensor
- Solar cell
- Other Echem experiments
Features
- portable potentiostat/galvanostat/impedance analyzer
- ±10V@1Amp control range
- current range
- 100nA to 1A
- 10nA with gain
- 3 measurement/control voltage ranges
- 9 measurement/control current ranges
- frequency range : 10uHz ~ 1MHz
- 14 EIS techniques capability including multisine implementation
- high speed data sampling time
- 2usec or 3usec depending on data point number
- fast sweep mode(5000V/sec with 10mV data sampling)
- voltage pulse or current pulse charge/discharge test (GSM,CDMA etc.)
- sine wave function for ripple simulatin inenergy test software package &
pulse plating available
- internal 542,000 data point storage and continuing experiment regardless of PC failure
- auxiliary voltage input : one analog input, ±10V
- light and compact design
- water proof case
- tablet PC included
- inclues basic software, Energy/Impedance/Battery/Echem analysis software packages
- free software upgrade
Experimental Techniques
Basic techniques
- Potentiostatic
- Galvanostatic
- Double step potentiostatic
- Double step galvanostatic
- OCP measurement
- Potential sweep
- Current sweep
- Cyclic voltammetry
- Fast potential sweep
- Potentiostatic Ru measurement
- Galvanostatic Ru measurement
Advanced Software Package(Included)
- EIS software package(EISe)
- Potentiostat EIS - Galvanostatic EIS - Pseudo galvanostatic EIS - OCP* EIS - Potentiodynamic PEIS - Galvanodynamic GEIS - Poteniodynamic HFR - Galvanodynamic HFR - Potentiostatic HFR monitor - Galvanostatic HFR monitor - Multisine potentiostatic EIS - Multisine galvanostatic EIS - Intermittent potentiostatic EIS - Intermittent galvanostatic EIS (*) The system measures open circuit potential before each frequency change and applies AC sine wave on this potential.
- Corrosion software package(CORe)
- Tafel(Tafel experiment) - Rp(Polarization resistance) - RpEc trend - PDYN(Potentiodynamic) - CYPOL(Cyclic polarization resistance) - GDYN(GalvanoDynamic) - Reactivation - Galvanic corrosion - Potentiostatic ECN - Galvanostatic ECN - ZRA mode ECN
- Energy software package(BATe)
a) Battery test technique - CC/CV testforcycle life test of lithium battery - CC/CC tet forcyclelifetestofNiCd or NiMH battery - Discharging test - EVS(electrochemical voltage spectroscopy) - Variable scan rate CV - Potentiostatic IV curve - Galvanostatic IV curve - Steady state CV - PITT(Potentiostatic intermittent titration technique) test - GITT(Galvanostatic intermittent titration technique) test - Pulse mode is available for GSM & CDMA profile. Pulse shape profile can be measured by user's demand. b) Control mode - Charge : CC, CC-CV, pulse, sine wave - Discharge : CC, CP, CR, pulse, sine wave c) Cut-off condition - Time, voltage, current, power, auxV etc. - Various battery charge/discharge test is available including pulse discharge for GSM, CDMA application
- Electrochemical analysis software package(EASe)
a) Step techniques - CA(Chronoamperometry) - CC(Chronocoulometry) - CP(Chronopotentiometry) b) Sweep techniques - LSV(Linear sweep voltammetry) - SDV(Sampled DC voltammetry) - Fast CV - Fast LSV c) Pulsed techniques - DPV(Differential pulse voltammetry) - SWV(Square wave voltammetry) - DPA(Diff.pulse amperometry) - NPV(Normal pulse voltammetry) - RNPV(Reverse normal pulse voltammetry) - DNPV(Differential normal pulse voltammetry)
Options
Product Images
|
|
|
|
|
|
|
|
|
|
|
|